Head down

Working for a living certainly makes the day go faster and today positively sped by.

At the moment there are political issues in my area of work and, as a result, we do not have access to Operational Architects. It will therefore come as no surprise that I have had to take on this mantle too* in an attempt to progress one of my projects. Over the past few days I have attempted to design an appropriate model and today I passed it out for a peer review … It was well received, so the next step will be to get the project team to review and, hopefully, sign up to it.

The remainder of the day was filled with calls, minutes and actions and it was soon time to knock off.  The evening was spent puzzling over, and fiddling with, a set of taper roller head bearings for the Enfield. It soon became apparent that I would need a professional with access to a press to insert the bearing races in to the sleeves … It looks like I will be nipping down to Redditch Motorcycles in the morning and I hope I haven't terminally jammed the race in the sleeve … oops!

---

* In this particular project I have been the Requirements Architect, the Project Manager in additional to my primary role as Solution Integrator. I had better watch out as the lavatory cleaner is looking a bit peaky today!

Work 'n play

After many weeks of very light duties it has taken me a while to get back in the saddle with regard to managing a reasonable workload but, after today's performance, I think I am just about there.

The bulk of the morning was spent performing the electronic equivalent of doodling as I started to sketch out an Operational Model for one of my projects. The afternoon was mostly taken up with calls and I was even diligent enough to draft and issue a set of minutes before I knocked off and took Whiffler to puppy training.

Puppy Training! … How can I describe puppy training?

On the plus side; at least he was slightly more focused than last week and, to be fair, he did reasonably well at the exercises where he was required to sit or lie down while I stepped away from him. He had never done either of these before and sort of understood what was required of him.

However it is so hard to hold his attention and he just so wants to bugger off down the room and play with the other pups. I have a faint recollection of Tyson and Marauder being a nightmare for the first few weeks and can only hope that he eventually gets it and settles down at school.

Comment of the evening came from Brenda; the class leader; "I thought poodles were supposed to be intelligent" followed closely by "He isn't anything like your other two".

The sooner I start the sooner I get it sorted ...

It is likely to come as no surprise that Sunday morning was spent dismantling the front end of the Enfield.

I made an early start on ancillary components like indicators, handlebars and gauges but there was then an interlude while I waited for TP to emerge from his pit, break his fast and decide on Sunday's outfit. He eventually appeared fully dressed mid-morning and we soon had the bike back up on blocks. Shortly thereafter we had the front wheel out, the forks removed and the casquette and steering stem were lying on the floor. TP received an honorary discharge for services rendered and I headed out to the garage to retrieve a hammer and a selection of drifts. It was then a few moments work to removed the bearings and drive the bearing races from the frame, steering stem and casquette.

By the time I had finished it was lunch time and afterwards I headed around the Three Miler with the dogs. After yesterday's wet snow I was expecting it to be vile but the roads and verges had dried considerably in the cold weather and when we returned none of the dogs needed bathing … I was bloody amazed and I am sure that 30% thought we had just spent the past hour sat in the pub.

In an attempt to convincer her that I had actually completed a walk, I settled on the sofa in front of the fire and snored for the next ninety minutes.

As the afternoon drifted in to the evening I wandered back to the corpse of the Enfield and considered my options. I could do sweet Fanny Adams to the front of the bike until new bearings* arrive alter in the week. I therefore grabbed a box of parts from my stash and started to dry fit the rear brake pedal components …

… that should keep me busy for a while.

---

* and a new ammeter … I knackered it dismantling the front end this morning

Swings and Roundabouts

There wasn't a huge amount to report for Friday. It was really just a case of head down, clear the work that accumulated from Thursday, write and submit a report and prepare for next week. It isn't very exciting here on the page and it was little better in real life.

The preceding pair of sentences are more than adequate to describe the 30th and I will now leap forward to Saturday.  We didn't plan to have a particularly busy day but we did want to head over to Evesham in the afternoon so my primary objective in the morning was to get the dog's walked.

We had had a light covering of wet snow overnight so the walk around the Three Miler was almost attractive as the filthy lanes were obscured by a rapidly melting half inch of snow. Needless to say the dogs got soaked and needed a good towelling down, on our return, before being confined to the Hall until they had dried off properly.

In the afternoon 30% and I headed over to Evesham to complete a few errands. Our first stop was at the Picture Framers where we dropped off a C19 engraving of some terriers that we picked up at an auction earlier in the month. We also took along the C18 painting of the Hunter just to see if there was anything that could be done with it.

I had previously contacted a local picture restorer about this old and filthy equine canvas, but his initial estimate for cleaning and restoration had been exorbitant and neither 30% nor I were willing to proceed without some idea of both the quality and value of the painting. It is all very well shelling out a small fortune to clean a Stubbs but we don't even know if this damned thing has a signature.

The framer advised that he knew a chap that might be able to restore it but suggested cleaning a small portion to see what it looked like. He scurried off in to his back room and returned with a wad of cotton wool and a bottle of clear liquid. He trial cleaned a small section along the edge of the canvas and, though it wasn't exactly a moment of revelation, it was apparent that the grime could be removed and we would be able to get a better idea of what we had. He advised that he would charge twenty pounds to give the canvas a clean so we left it with him. I must admit that I am quite excited to see his results in a couple of weeks time.

After leaving the framers we headed over to Bond & Moneypenny's to deliver a barely used Superdry jacket and then on to Stevie and the Elf's to drop off bubble-wrap … The first visit was to keep Bond jnr warm this winter and the second was to furnish S&E with packing materials as they are moving house next week. Both visits were brief, especially the second as S&E were out so the bubble-wrap was left in their garden for them to retrieve later.

We headed home and I recruited TP's assistance to lift the Enfield from it's stand with the aim of fitting the side stand and foot rests. As soon as I attempted to manoeuvre the bike it was apparent that something was amiss. The steering was horrible. Now that the full weight of the bike was supported by the steering head the steering had a definite notchiness. The bearings had looked fine during reassembly but are obviously shagged. I contemplated the several steps that would need to be retraced in order to remove the bearings and replace them … Fuck it!

I fitted the stand and foot pegs and then retired to the sofa with an iPad to research my bearing options. Did I say "Bollocks"?

A full day

Today seemed to be non-stop.

I hit the laptop around nine o'clock and was straight on to the weekly team call.I lingered there until around quarter past ten when I needed to stop, step away from my laptop, drag a razor around my face, throw on some business casual clothes, grab a set of notes and a few other necessities and head out of the door.

I then had to follow a circuitous route, as a result of roadworks, to the Dentist where I had a check up and scale. All seemed to be going well until she took a peep at one of the x-rays and it appears that a filling is in order and that may be followed by a crown at some point later in the year.

Once free of the Dentist's chair I headed down the motorway to Worcester and found myself a parking spot on one of the campuses of Worcester University. The reason for this out of character visit to an educational establishment is as follows …

… My oldest and dearest friend; Moneypenny is a Humanities Lecturer at this establishment and way back in 2013 she collared me and asked if I would be willing to attend their 2014 Career Fest and give a short talk on my educational and employment history as I was, apparently, a perfect example of those people who didn't know what they wanted to do for a living after leaving school.

I gave the talk in January 2014 and they either liked it or couldn't find anyone else because I was invited back to give a repeat performance today. I was bloody lucky that I had been diligent and had typed up my notes from my 2014 talk as this week had been very busy and had not had time to prepare. I ended up spending an hour sat in the car park; reviewing my material and jotting down a few additional thoughts as I waited for the session to kick off.

The talk went well and the staff and audience seemed to like the material that I had presented so by four o'clock I was able to escape and head back towards The Pile …

… I wandered in to the house and was greeted by 30% and the dogs and was about to head upstairs to get changed when 30% commented that I would be getting back in to much the same clothes in an hour's time. I had totally forgotten that we had been invited out for dinner this evening with 30%'s Mum and Dad. I revised my plan, remained in my clothes and pottered for an hour which basically involved putting a second coat of paint on my indicator brackets.

30% and I then headed out, taking a minor detour via Tesco to collect my new spectacles from their Optician's department. Our final destination was Redditch College, which has a full restaurant facility that opens each Thursday evening to allow their catering students to practice on real, live people. This evening they were serving a Burns Night Supper and I have to report that it was absolutely gorgeous.

The menu was five course in length and my choices were as follows:-

Scallops and Black Pudding salad

-

Cockaleekie soup

-

Haggis and Neeps

-

Pan Fried Duck Breast served with an Orange Clootie Dumpling and a choice of vegetables

-

Bread and Butter Pudding

-

Coffee and Petit Fours

I simply could not fault the meal. It was lovely and we had a lively evening, lubricated by wine, catching up on each others' news.

Mind You, by the time we got home I was glad to slip in to my pit. I was shattered.

I did manage some work this morning

After spending two days with a 'phone glued to my ear it was something of a relief to only have this afternoon taken up with conference calls.

I was therefore able to spend the morning clearing my inbox and progressing my latest batch of projects. As I sifted through my mail it became apparent that yesterday's review decision had been reversed and one of my projects is now able to move forward unhindered … so that one will probably be crossed off my list in the next day or so. The rest all need nudging forward but tomorrow is already blocked out with appointments so it looks like it will be Friday before I do any work this week!

On the bike front the 130 mm M8 stainless steel bolts arrived in the post this morning so I was finally able to fit the sump guard to the underside of the Enfield's engine. I now just need to grab some of TP's time and I can get the side stand and foot rests fitted.

The ongoing task this week has been to refurbish the front indicator brackets. The original plan was to mount the front indicators either side of the casquette but a redesign was necessary when they were held in position and a) looked shite, b) would be a pig to mount and c) were unlikely to conceal the holes drilled in the casquette to mount the now junked windshield. It was therefore necessary to trawl through a box of rusty junk, retrieve the indicator brackets, clean them up and repaint them so they can be re-affixed to the bike. They need another coat or two of paint but should be bolted back on at the weekend too.

Give me Strength

Today was very much like yesterday.

By eight o'clock I was dialled in to the conference bridge and endured several hours of one of the most blatant job creation schemes I have ever witnessed.* There was much talk of structure and governance and very little focus on identification of requirements and the necessary technical solutions needed to address them. If I am any judge this programme will not be completed before the current Master Services Agreement expires in three years time. There were no references to low hanging fruit, proofs of concept or  quick wins that one would normally expect to hear, particularly when, as in this case, this shit is about to hit the fan.

I was able to exit the workshop early as I had a review call to attend. I would have liked to use the term light relief  in relation to that review call but it soon became apparent that clueless clusterfuck was far more appropriate. Our request was to deploy a certain feature on a device and we were told in no uncertain terms that, while it was feasible, it was not officially sanctioned and we were on our own if we deployed it … in other words we would have to provide full support for the devices. However, on the call and in a flurry of mails that followed, it became apparent that the feature is not only used, it looks like it has official sanction too. This suggests that the Reviewers have about as much knowledge on the subject as I do.**

Give me strength!

Eventually the day ended and I did what any sane person would do … I emptied the bottle of Gordons in to a glass and added a slug of tonic to take the edge of it … aah!

As for the Enfield; the tennis balls were attached to the handlebars,*** the brake caliper was bolted to the fork slider and the headlight rim was attached to the casquette. Today's technical conundrum was how to disguise the holes in the casquette left after removing the ridiculous screen. The solution is likely to involve the original mounting spacers and some stainless steel socket cap screws …I just hope it works.

---

* Call me cynical but many of the key team members are highly paid Contractors and they are not particularly well managed. They have very much been left to do their own thing and I think that lucrative procrastination tends to neatly define their modus operandi.
** and that is frightening an order of magnitude beyond petrifying
*** This is obviously temporary but does make it look a little like a circus clown bike

I need a couple of tennis balls

Today was not fun.

As a result of a very late invitation to a workshop in The Hague, my travel request had been declined. The impact of the refusal was that I was required to dial in to a conference call at eight o'clock this morning and spend the bulk of the day with a headset clamped to my skull.

I did my best to follow the narrative but there were occasions when many, garbled voices made the discourse unintelligible. To make matters worse I am scheduled to do the same tomorrow.

As five o'clock drew near the workshop closed for the day and I finally escaped from the laptop. My only real break had been from eleven until twelve* when I clamped the handlebars to the Enfield. This activity meant that TP was given an additional mission when he took Whiffler for a run around the local playing field … I asked him to check the long grass near the tennis club and bring me back a couple of tennis balls if he found any.

My luck was in and he returned not only with a pair of tennis balls, but also a football that will give the dogs a huge amount of fun. I scrubbed the worst of the grime from the balls and put them in a warm place to dry off.

30% and I then gathered up Whiffler and a variety of doggy accessories and headed off to puppy training … I'm not really sure why we bothered as he was a headstrong little bugger that was far more interested in his classmates than on performing as requested. To be fair he wasn't a total disaster but it is fair to say that he was easily distracted.  It appears that the previous lesson had included a bitch that had just finished her season so it was quite possible that the hall had too many distracting scents this evening.

That just about covers my day … apart from explaining about the tennis balls. Motorcycle handlebars are like bull horns until the grips are attached. The balls will have a short slit made in each and be stuck on the end of the bars to minimise the risk of injury as work progresses.

---

* Remember the workshop was operating on Central European Time so they lunch early.

For the want of a nail ...

Sunday was taken at a very leisurely pace.

Ten o'clock had passed before I had breakfasted, slipped on a coat and hat, gathered up the dogs and exited the house for a wander around the Three Miler for a walk…

… My timing was perfect, as I arrived home to find that the groceries had been delivered and put away in my absence and I needed to do little more than hose down the dogs legs' to remove the mud accumulated in the past hour.

My only must do had been accomplished and I had the rest of the day to do as I pleased. I therefore recruited TP's assistance, hefted the Enfield up on to blocks and fitted the front wheel. The plan was to follow this with the installation of the sump guard, side stand and foot rests but it soon became apparent that I needed a longer stud to fit the guard. Neither stand nor foot pegs could be fitted until the sump guard was in place so my plans for the afternoon were buggered.

I also seemed to be having real problems keeping my blood sugar high enough since returning from my walk so I shoved a custard tart in my mouth and headed for the sofa with a cup of coffee. The film I selected must have been very bad as I awoke a couple of hours later with one hell of a crick in my neck.

I was reluctant to allow a missing M8 stud to halt progress on the bike so I extracted the front mudguard and carrier from their wrappings and fitted them instead.

It definitely looks like a motorcycle now.

Burns Night Supper

30% and I had been hoping for an overnight frost and a walk around the crispy lanes with the dogs but, unfortunately, the weather did not oblige, instead of bright and frosty it was grey and damp.

Plans were therefore revised and I wandered out to the garage to deal with the rodent problem that has recently become apparent. I had purchased some rat bait and bait boxes last weekend from the local Feed Store and this morning I fabricated a couple of wooden stakes that would allow me to secure the bait boxes in the chicken runs and close to where we think the rats have their nest. These activities took an hour or so and all I need to do now is wait at least a week before checking the bait.

My must do task had now been crossed off my virtual to do list and I settled in the Hall with the Enfield … and that it what filled much of the day. By the time I halted and cleaned myself up I had fitted the forks, complete with gaiters and crown plate, and had also inserted a new ammeter in the casquette. I am hoping to secure some of TP's time tomorrow so that the front wheel and perhaps the side stand can be fitted.

This evening 30% and I had been invited to the VIllage Burns Night Supper. The venue is the pub down on the village green and at half past seven we wandered down the road and settled ourselves in The Old Bull. We had a pleasant evening and, whilst the portions were modest, the food was lovely. The highlights were the cockaleekie soup and the haggis itself, which was magnificent.

Glad it's Friday

Today's significant news is that next week's trip to The Hague isn't going to happen.

They key approver declined mine and my colleague's applications on the basis that they were "too late". Our Manager is well aware that we applied as soon as we were invited, so there is no fault on our part. The net result is that Monday, and possibly Tuesday,  will be spent half listening to a workshop using conference 'phone facilities.* Rest assured that the workshop Organiser was made aware that they had not given us sufficient notice for our attendance. It is somewhat ironic that he sees us as key attendees.

I cancelled my hotel booking and spent the day actually gaining traction on a couple of projects and planning next week's activities. I won't go in to details, it would not make gripping narrative.

I am waiting for a couple of parts for the Enfield so the only attention it received today was the occasional admiring glance as I wandered past.  The evening was spent in front of the fire on the sofa and, as it says in the title; I'm very glad it is Friday as the transition from idling to high speed is quite wearing.

---

* Shoot me now! These are devices that have a superb ability to distance the audience from the debate and minimise their ability to concentrate and therefore participate. If you are sat in the room everyone can see what you are doing. If you are remote and the content is, shall we say, tedious who knows or cares if you slope off to the bathroom or check your emails or eBay auctions.

Today was a hard slog

It should come as no surprise that work was not going to be fun today.

I had two meetings to minute with a combined duration of three hours. That equated to nine pages of scrawled notes and a very good memory to construct versions of the truth that both my Boss and I would be happy with. It was an arduous task that took a significant proportion of the day and it was necessary to reward myself to maintain any level of motivation …

… towards lunch time the postman arrived and delivered the bushings for the Enfield's short fork cover tubes. I treated myself to a twenty minute break, fitted the bushings in to the cover tubes and jiggled them into place to connect the steering stem to the casquette.

 I thought I would now be in a position to insert the forks and took a moment to check a clamping bolt that fits inside the casquette. This produced a series of expletives as it became apparent that during the original assembly of the bike the idiots had managed to knacker the threads and another few quid needed to be shelled out to order a replacement. It is not the cost that is annoying, it is the delay while I wait for the part to arrive.

I scurried back to the study, ordered the part and settled to finish the day's work. By the time I had cleared the decks I was brain dead. This working for a living is taking some getting used to after being short of work for so long.

After along day of concentration I didn't feel like doing anything more than slumping on the sofa, but I am working on the principal that completion of even the smallest job progresses the bike slowly forward. A small step is better than nothing at all. As a consequence I braved the cold of the garage, disconnected the Regulator/Rectifier unit from the loom and installed it on the bike.

I might actually get some work done tomorrow rather than just writing about what we need to do.

Busy, busy, busy

For the first time in 2015 I actually tidied myself up and dragged my sorry arse in to the nearest Depot.

I needed to hold an initial fact finding call on a new project and two of the SMEs work in the same areas as me so I schlepped in to work to have a face to face.

I have to be honest and confess that I was not in the office at the crack of dawn and actually delayed my trip in to work so that 30% and I could have a site meeting with the Local Authority Tree Officer …

… we plan to rebuild the garden wall* and the works could possibly impact the two Yew Trees, both of which have TPOs** on them. We have a sound relationship with the Tree Officer as she lives just down the road and knows the trees well. She is more than happy with our plans and approach and simply needs to inform the Planning Authorities, then we can make a start.***

With that negotiation accomplished I headed in to work and had a fairly busy morning that included submission of expenses, a hair cut and some actual proper work. My afternoon included four hours of meetings and I was required to minute three hours of those discussions. I will point out that my Boss was hosting a two hour meeting and asked me to minute it for him. I don't mind, but it is actually quite a significant task to summarise 120 minutes of technical discussion and it will take me a good couple of hours tomorrow to complete the task. I know why he asked me; a) he want us to cover our arses on the latest project, b) he is on vacation tomorrow and c) he knows my minutes are bloody fantastic.

It is fair to say that I was knackered by the time I got home and did very little this evening. I am also aware that I have two sets of minutes to draft tomorrow before I even make a start on the actions I have been assigned.

---

* A much more significant task than it appears as the wall is more than 20m in length and is a retaining wall as our garden ground level is about 1.5m higher than that of the road it adjoins.
** Tree Preservation Orders
*** Once we get and agree a quote for the work

Getting stuff done

I can report a complete recovery from Monday's brain tumour so Tuesday was spent making a start on the week's work.

After many weeks with very little to do, I finally have a reasonable amount of work on my plate so much of the day was spent nudging my various projects forward. It also seems that I am required to attend a workshop in The Hague for a couple of days next week so I prioritised the creative bullshitting that will hopefully get my request to travel approved by the management.*

The only other news from work is that there are some politics going on which mean that a key resource is no longer available to work on the development of solutions. As a result it looks like I may need to get my hands dirty and fill this gap as a temporary measure.**

So that is work covered and now a quick precis of progress on the Enfield. A plethora of parcels arrived today and as a result I was able to fit new pilot lights to the casquette and since I was meddling in that area I also re-fitted the ignition switch. There was a moment of panic when the switch would not go through the mounting bezel but a few moments with the Dremel and a grinding tool removed the excess chrome that was obstructing progress. I admired the leather straps that will be used to hold the bike's wiring loom in place and then started to check through what I foolishly thought to be the final order from Hitchcocks Motorcycles.

Everything I ordered had arrived. There was a minor issue with a missing bolt but a quick 'phone call soon had a replacement winging its way to The Pile. It was only when I started a trial fit of the forks in the casquette and steering stem that I realised that I needed a pair of bushes that I had failed to order. Progress had been halted by the lack of five quids worth of parts …sod it! ***

The only other accomplishment today was that Whiffler and Marauders' faces were clipped to silence 30%'s incessant nagging on this subject. Here is the evidence of my efforts.

Many pieces of ham were needed to achieve this.

---

* before the flight leaves the tarmac on Sunday evening
** it had better be temporary
*** I won't mention the fact that I will need to partially disassemble the steering to insert them. Two steps forward ...

Dizzy

The day started like most Mondays. I drank coffee, ate toast, wondered how quickly the week would pass and skimmed through the BBC news headlines on-line.

Then as I settled to start the working day I started to feel a little odd. Initially it was difficult to describe; light headedness, perhaps a little dizzy and then I felt like I was going to faint and this was worrying. It became apparent that keeping still calmed things down somewhat so I headed for my bed and shut my eyes to stop the room from spinning.

I went through a mental checklist of possible ailments and settled on either a brian tumour or an inner ear infection. I didn't have long to whittle these down to a definite diagnosis as 30% had decided that I really ought to be seen by a professional. If I am honest I was very grateful as the symptoms were very disconcerting. A pain in a bodily part is fairly easy to deal with compared to the sensations of affected consciousness. Fortunately the Doctors' Surgery is just over the road and the delightful receptionist squeezed me in as an emergency.

Half an hour later I was treading slowly home having been advised that I am suffering from a form of vertigo which has been induced by movement in the particles that are contained within the inner ear. This should settle down in a few days and I was told to take it easy and prescribed medication to calm the symptoms.

As a result I spent the rest of the day in bed or on the sofa and have nothing to report. I did feel somewhat more normal by the time I prepared for bed.

Weekend Round Up

A few weeks ago Whiffler developed a liking for my spectacle case and made quite a good job of stripping off the outer cloth covering. A few days after that he had another go and the net result was a mangled pair of titanium armed, frameless spectacles … Little Sod!

Being of an age where glasses are necessary for anything happening up close and personal I felt somewhat exposed with only a single pair, so first task on Saturday was to head in to Redditch for an eye test. This activity took a good chunk of the morning as there was a side trip to the supermarket too. It was agreed* that ordering my new specs would be deferred for a couple of days until such time as a trip to Tesco was necessary as, apparently, Specsavers' frames are crap.

Back at home the first activity in the afternoon was a wander around the Three Miler with the dogs. Actually it was twenty minutes with my head in the February issue of Bike Magazine then a wander around the Three Miler but I'm trying not to let detail clutter the narrative. It will come as no surprise that the dogs were bloody disgusting after a walk around the lanes but fortunately TP and 30% were on hand to assist with washing them down.

Late in the afternoon I finally settled down with the Enfield and carefully assembled the steering stem, head bearings and casquette. When I say carefully I mean carefully as the bearings are loose and each of the 38 steel balls needed to be cleaned and greased before inserting in to the appropriate bearing race and then all of the components slipped in to place. It all went very well and I realised that I need to get my arse in to gear and get some spares ordered so I can fit the forks.

Sunday's first mission was a trip out to the local feed store followed by the second trip of the weekend in to Redditch. Tesco was our destination and I soon had an order made for a couple of pairs of replacement specs. There was an obligatory wander around the aisles to collect a few items and, after using the self-service till with 30%, I would like to suggest that they add a new phrase to the machine's vocabulary … Keep that woman away from me would definitely make progress much more straightforward. **

Back at home I had some time to kill before lunch so I headed out to the garage and lugged the bacon slicer in to the warmth of the kitchen. The cured loin was taken down from the meat hooks and an hour was spent converting it in to five and a half pounds of back rashers. This job took longer than expected and, with an interval for lunch, the bacon sandwiched lunch rather than the more normal reverse.

I then got out around the Three Miler for the second time this weekend and returned for a much needed session of dog washing. A fire was then lit and I must admit that I settled down to watch a film but actually ended up snoring on the sofa for an hour.

At some point in the day I refitted the steering lock to the Enfield and the latest lurch forward can be seen below.

I also got my spares ordered so next week may well see forks installed and the front wheel set between them.

---

* I was informed by TP and 30%
** 30% and the Bagging Area are not a great combination

Picture Post

It is still quiet at work, although I have picked up a couple of new projects over the last week. Neither of these are exactly racing ahead and it may be a few days, or even weeks, before either of them gather any pace. The net result is that I don't exactly have a huge amount to report on the work front and the progress with the Enfield doesn't exactly make a gripping read either. Basically this week has been taken up with a daily coat of black enamel paint on the steering stem prior to assembly, which is planned for the weekend. I did say that it wasn't exactly enthralling news!

As a result I decided to dip in to the photo archive and extracted this piece of Americana.

This photo of the Staten Island Ferry was taken back in August 2013 when we were in New York. After a trip over to Liberty Island we wandered over to the ferry terminal and watched the ferry, made almost iconic by so many films set in New York City, We also discovered that it was free of charge to ride the ferry and had ride out 'n back.

Thought for the day

At the moment there is a TV Commercial that features a chap that appears to work in a book or software shop. He is approached by two colleagues, one of whom excitedly demonstrates that everything this guy touches turns in to Skittles.

A stapler is offered … it turns to Skittles when accepted. The 'phone rings … it turns to Skittles when the receiver is lifted. The entire desk turns to Skittles when pounded in frustration by this poor man.

One wonders why he is working in media sales and hasn't, instead, offered his services at the nearest Skittles factory?

---

I really dislike Skittles

Thought for the day

Yes, they are a handful.
Yes, they are going to need a bath.
Now how about a conversational gambit I haven't heard before.*

---

* Mind you, it's better than the frequent occasions where I have stepped in to the road or a driveway to allow people to pass by on the narrow pavements and received neither acknowledgement nor thanks for the courtesy. There are some ignorant people about.

Snow flurries

There is not exactly a huge amount to report for today. The weather was grim and I spent much of my time making sure I was inside rather than out. By the end of the day we actually had snow falling but it stood little chance of lingering as it was so wet underfoot. It is a shame. I am not a fan of the wet, grey, winter weather but I love it when it snows and settles. There was no chance of that today but it was lovely to see it falling this evening,

I did make minor progress on the Enfield and the steering stem has now been cleaned up, had it's rust patches rubbed down and the first coat of black enamel has been applied. As much of this component is obscured by the casquette* once fitted, I decided not to strip down the entire piece and have just treated the few rusty areas on the underside. It will need a couple more coats and then I can think about fitting the steering and front suspension components.

We also put down the rug that we acquired at Saturday's auction. It looks fantastic in the lounge and the  colours go really well with the decor.

---

* The casting that holds the headlamp and the tops of the forks